The powder coated cable tray is a galvanized cable tray that is processed and coated with a layer of electrostatic powder. It has the same appearance as the galvanized cable tray, but it is an upgraded version of the galvanized cable tray. It protects cables (wires) in a sealed environment and has very good shielding performance. With the effect of electrostatic powder spraying, it can prevent static electricity, rust, increase load capacity, waterproof and so on, The appearance of the cable tray itself will be relatively smooth. With the matching of colors, the aesthetics will be greatly improved after installation.
Uses: basement parking lot, factory power transmission, personalized hotel, large shopping mall (use different colors to match the beauty of the project building), etc
Brief introduction to the model of powder coated cable tray:
Powder coated cable tray: the powder coated trough type tray is made of galvanized trough type cable tray and processed with a layer of electrostatic powder spray plastic. The trough type bridge is shaped like a box. It protects cables (wires) in a sealed environment and has very good shielding performance. With the effect of electrostatic powder spray plastic, it can prevent static electricity, rust, increase load capacity, waterproof, etc. after electrostatic spray plastic processing, the bridge's own appearance will be relatively smooth, With the matching of colors, the finished installation will greatly improve the aesthetics.
Powder coated tray type cable tray: the galvanized tray type bridge is processed by electrostatic plastic spray. Its main features are: enhanced corrosion resistance, aging resistance, increased adhesion, and you can choose your own color that matches the architectural design as the appearance style of the bridge.
Powder coated ladder type cable tray: the surface of the powder coated ladder type bridge is processed by the galvanized ladder type cable tray and coated with a layer of electrostatic powder. The appearance is very smooth and beautiful. After carefully removing the oil stain, dust and polishing of the objects and ensuring that there is no mistake, the powder is sprayed on the shell of the objects, pushed into the paint baking oven at about 200 ° C for about 20 minutes, and then cooled and insulated. This greatly improves the abrasion resistance and bearing strength of the bridge itself.
The above is a basic introduction to what material the spray bridge is made of. The spray bridge is an upgrade of the galvanized bridge. Although the appearance is the same, it is better in performance.
